Dutch Pinball
–
Technical Support TBL FAQ
rev 0.51
Page 63 MPF Operations faq rel 0.70
Test functionality
•
Boot the TBL and go into the testmenu
In this menu, you can Carry out any test you desire to check if something is working properly.
Switch test
If you activate this test, it will display all switches which are active at that moment.
If you have doubts about a certain switch, you can check the correct working here. Push the
switches on the MPF (parking targets, loop ramp, ramp made, closed door) and see if this
switch pops up on the display here. Check that the 2 parking targets are not always lit (which
means a stuck switch) Also, a sound can be heard when a switch is activated and you can also
see if there are no switches active when they should not be.
