Operating Manual
© Dürr Systems GmbH
EcoGun AA MAN 2 P
Chyba!
Pomocí karty Domů použijte u textu, který se má zde
zobrazit, styl Überschrift 1.
Version: 01
as of: 09/2014
25 / 46
Repairs or the product components are not approved by the
manufacturer. Damaged parts must be replaced.
For questions about the service and maintenance
tasks, or to obtain training, contact our training
department (see chapter 11 "Contacts &
Hotline)".
Pos: 17 /CCP/SG_EcoGun/Eco Gun AS MAN Gravity Feed/09_01_Wart_Reinig @ 37\mo d_1402401191890_20.docx @ 472811 @ 2333 @ 1
7.1
Cleaning
7.1.1
Cleaning Agents
W A R N I N G
Explosion and fire hazard due to easily
inflammable materials.
This may result in casualties or severe injuries.
Do not smoke in the working area. Do not ignite any fire and no open
flame in the working area.
W A R N I N G
Danger of injury
When working with cleaning materials, harmful
vapors may develop.
Observe the manufacturer's notes by all means.
Only use cleaning agents approved by the paint manufacturer for the
used paints or the purging agent that is used in the painting
installation.
A T T E N T I O N
Danger of material damage and production
interference
Damage of the parts to be cleaned.
Do not use any ultrasonic bath to clean.
With waterbased paints, you may use alcohols like isopropanol or n-
butanol as cleaning agent. You may remove rough-dried residues of
waterbased paint with an organic solvent approved by the paint
manufacturer.
If parts cannot be cleaned directly with purging agent, a soft brush or
a bristle brush, you may immerse the parts in a cleaning bath.
