Operating Manual
© Dürr Systems GmbH
EcoGun AA MAN 2 P
Chyba! Pomocí karty Domů použijte u textu, který se má zde
zobrazit, styl Überschrift 1.
Version: 01
as of: 09/2014
17 / 46
6.4
Operation of the high pressure spray gun
Turn trigger lock Ref. 1237
– 3 by
90 degrees downwards
(spray gun
is now released).
Pull trigger Ref. 1248 - U4 up to the
first pressure point (pre-air).
Pull
trigger Ref. 1248 - U4
completely, high pressure spray jet
starts.
Secure high pressure spray gun all
times, after ending the spraying
procedure, by turning trigger lock
90° upwards.
Note:
In order to avoid
a drop formation at the spray gun, keep the
pre-air valve 1-2 sec. open after spraying.
6.5
Flat jet regulation
The atomization air is regulated with the air regulation ref.1248 - U6
Right Turn -
less air
- low atomization
Left Turn -
more air
- high atomization
Pos: 13 /CCP/SG_EcoGun/Eco Gun AS MAN Gravity Feed/08_02_Betrieb _Pistführung _Gravity @ 37\mod_1402401090916_20.d ocx @ 472765 @ 3 @ 1
6.6
Trigger forces
Trigger pressure adaptation according to the
material pressure.
Pressure force is adjustable from approx.80 - 250 bar (1.138 -
3.557 PSI).
-
250
bar
tighten
screw
Ref.1236-5 completely.
-
80 bar -unscrew
screw
1236-5 to tappet.
