TROUBLESHOOTING
Note:
Troubleshooting problems may have similar causes and solutions.
PROBLEM
POSSIBLE CAUSE
SOLUTION
The engine
will not start
Is there fuel in the tank?
Refill the fuel tank.
Is there enough oil in the
engine?
Add the recommended oil.
Is the spark plug in good
condition?
Readjust gap and dry the spark plug.
Replace it if necessary.
Is the fuel reaching the
carburetor?
Clean the fuel sediment cup.
up to 1 month Fill with fresh gasoline and add gasoline conditioner.
up to 2 months
up to 6 months
Less than 2 No preparatation required
weeks
container and fill with fresh gasoline before starting.
Fill with fresh gasoline and add gasoline conditioner. Drain the
carburetor float bowl. Drain the fuel sediment cup. Remove the
spark plug and put a tablespoon of engine oil into the cylinder head.
Pull recoil starter slowly to distribute the oil evenly in the cylinder.
Reinstall the spark plug. Change the engine oil.
After removal from storage, drain the stored gasoline into a suitable
Fill with fresh gasoline and add gasoline conditioner. Drain the
carburetor float bowl. Drain the fuel sediment cup.
TO PREVENT HARD STARTING RECOMMENDED
SERVICE PROCEDURE
STORAGE
TIME
Before storing the unit for an extended period:
Be sure the storage area is free of excessive humidity and dust.
Service according to the table below:
STORAGE
Page 21 of 29
Summary of Contents for XP10000EH
