SAE 10W-30 is recommended for general, all-temperature use. Other viscosities shown in the
chart may be used when the average temperature in your area is within the indicated range.
1
Remove the oil filler cap and wipe the dipstick clean.
2
Check the oil level by inserting the dipstick into the filler neck without screwing it in.
3
If the level is low, fill to the top of the oil filler neck with the recommended oil.
Fuel
Check the fuel gauge, and refill the tank if the fuel level is low
.
Refuel carefully to avoid spilling fuel. Do not fill above the shoulder of the fuel strainer
.
Gasoline is highly flammable and explosive, and you can be burned or seriously injured when
refueling.
●
Refuel only outdoors.
●
Wipe up spills immediately.
Unleaded gasoline produces fewer engine and spark plug deposits and extends exhaust system life.
Never use stale or contaminated gasoline or an oil/gasoline mixture. Avoid getting dirt or water in the
fuel tank.
Use unleaded gasoline with a octane rating of 86 or higher.
●
B
e
s
u
r
e
t
o
s
h
u
t
t
h
e
e
n
g
i
n
e
d
o
w
n
a
n
d
keep heat, sparks, and flame away.
This engine is certified to operate ONLY on unleaded gasoline
or LPG
.
Page 12 of 29
Summary of Contents for XP10000EH
