6.2
Starting position for the thread take-up knife
Rule:
When the roller (1) is at the highest point of the control cam (2), the
end of the thread take-up knife (3) should overlap the blade of the
counter-knife (4) by 0.5 to 1 mm.
–
Check that the control cam (2) abuts on the circlip (5).
–
Position the control cam according to the rule.
–
Loosen screws (6).
–
Adjust the thread take-up knife (3) according to the rule.
–
Tighten screws (6).
Caution: Risk of Injury!
Turn the main switch off.
Only adjust the thread trimmer when the machine is turned off.
29
GB
2
5
1
4
3
6
