2.5
Position of the eccentric tappet and the feed dog stroke
Rule:
When the handwheel pointer indicates “239” on the scale, a settings
pin inserted into the eccentric tappet should be flush with the ridge on
the crankshaft (4).
–
Turn the handwheel so that the pointer indicates “239”. Loosen
screws (1).
–
Insert a settings pin (2) into the eccentric tappet (3). Position it so
that it is flush with the crankshaft ridge.
–
Tighten screws (1).
9
GB
3
1
2
4
