3.5
Press pad for the double-needle sewing machine
Rules:
1. The press pad should touch the material without any pressure.
2. The press pad should be positioned so that it is aligned in the
sewing direction and laterally along the edge of the stitch holes.
–
Put two layers of leather of approx. 1.5 mm thickness under the top
roller. Adjust for a mid-level fabric pressure.
–
Loosen screws (1) and move the holder (2) with the rear press
pad (3) vertically until it rests gently on the leather.
Tighten screws (1) gently. Loosen screw (4) and do the same for
the front press pad (5). Remove the leather. Rule 1 has been
fulfilled.
–
Adjust the press pad according to rule 2: Adjust the rear press
pad (3) in the sewing direction by means of screw (6) and laterally
by turning the holder (2). Adjust the front press pad in the sewing
direction and laterally by means of the screw (7).
–
Tighten all screws.
Caution: Risk of Injury!
Turn the main switch off.
Perform adjustments only when the machine is turned off.
20
7
4
1
2
6
3
5
6
