10
10
TIMBER FRAME - BACK WALL
10
TIMBER FRAME - FRONT WALL
• Nail lintel to studs using the 320mm studs to establish correct height.
• Nail 320mm studs to top plate and lintel, spacing these evenly apart.
Select
1 x 3900mm Base Plate
1 x 3900mm Top Plate
1 x 2400mm Lintel
6 x 2440mm Studs
3 x 320mm Studs
2 x 615mm Nogs
• Select one 3900mm base plate
(Green), one 3900mm top plate
(Red) and four studs (Yellow). Lay
out plates and two studs on a fl at
surface and nail together using two
90mm nails per join.
• Nail one stud each side of doorway
to top and bottom using the 615mm
nogs to establish correct position.
• Nail remaining two studs to inside
of studs and top and bottom plates
to make a double stud each side of
doorway opening.
320
21
10
615
3900
2530
2400
615
90
45
90
45
45
45
45
1132
1263
Select
1 x 3900mm Base Plate
1 x 3900mm Top Plate
4 x 2295mm Studs
3 x 1240mm Nogs
• Select one 3900mm base plate
(Green), one 3900mm top plate
(Red) and four studs (Yellow).
• Lay out plates and four studs on a
fl at surface and nail together using
two 90mm nails per join. Studs are
positioned 1240mm apart.
• Position nogs 1200mm up from
underside of bottom plate to centre
of nog and nail in place.
45
45
45
45
45
45
45
111
8
1132
2385
1240
3900
1240
1240
