xi
How to Use the Instruction Manual
Conventions Used in this Manual
Introduces instructions for correct operation of the machine. If these
instructions are ignored, the machine my not be able to operate at optimum
performance, or may break down.
Introduces information that is useful for operation and maintenance of the
machine, or information about the machine’s performance, etc.
IMPORTANT:
NOTE:
33
S
Adjusting Darkness
If the test print made after platemaking is too light, adjust the print darkness. If you cannot
adjust the print darkness sufficiently to give a satisfactory print, adjust the plate darkness.
"
You can print immediately after adjusting the print darkness.
"
If you adjust the plate darkness, you must repeat the platemaking process before making prints.
IMPORTANT:
2
The plate darkness can be adjusted in 5 steps.
Make the plate more dark if the document is light, or light if the document is dark.
"
NOTE :
Adjusting Plate Darkness
s
How to Adjust Plate Darkness
Pressing
(CANCEL) key redisplays the main screen.
1
Open the Panel cover.
2
Press
(
PLATE DARKNESS
) key.
3
Press “
CURSOR
” keys to select “
PLATE
DARKNESS
”.
4
Press
(
OK
) key.
The selected plate darkness is set.
Printing
(Ad
v
anced)
3.
SELECT PLATE DARKNESS WITH
AND PRESS
PLATE DARKNESS
LIGHT
MEDIUM
DARK
w
q
e
Select
r
Set
¡
If you reset to Standard
"
Press
(ALL CLEAR) key. In this case, all
settings are reset to standard mode.
“ Standard mode”
a
see p.10
"
Do not remove the cover affixed with
Warning Label 1.
"
Personnel may be injured by the movable
cutter inside the machine.
WARNING
Press the (PLATE DARKNESS) key, then “CURSOR”keys.
Select “MEDIUM” and press (OK) key.
Adjusting Darkness
d
[Plate Darkness]
2
The manual composition is as follows. ( The below is a sample and differs from the actual contents. )
Title
Title contents
Subtitle
Operation
procedure
Page
Subtitle
contents
Chapter
title
Related
Illustration
Display
Screen
Key
Warning / Caution
Be sure to observe.
a
see page iii for
details
Topic / [ ]: Key to use
