2
1. Introduction
Attaching/Removing the Dust Cap
To remove the dust cap from the projector, push the
tongue at the top left outward and pull the knob at the
center of the cap.
To attach the dust cap to the projector, locate the catch
on the lower end of the dust cap and place it into the
opening of the projector with the point of a triangle mark
(
▽
) facing downward (
①
in the figure below), and then
push the upper end of the dust cap against the projec-
tor to place the catches into the slot while clutching the
handle (
②
in the figure below).
