Dukane 68100WUSS-L User Manual Download Page 79

Page: 79 / 203

3. Convenient Features

The [PROFILE] selection screen appears.

6. Press the

▼

▲

buttons to select the [PROFILE] number, then press the ENTER button.

Return to the [REF. LENS MEMORY] settings screen.

7. Select [STORE] and press the ENTER button.

The confirmation screen will be displayed.

8. Press the

◀

button to select and [YES] and press the ENTER button.

Select a [PROFILE] number and save the adjusted [LENS SHIFT], [ZOOM], and [FOCUS] values to it.
• The [FORCED MUTE] setting stops projection during lens shift. (

→

page

120

)

9. Press the MENU button.

The menu will be closed.

TIP:

• To store adjusted values for each input source, use the Lens Memory function. (

→

page

103

)

Summary of Contents for 68100WUSS-L












































































































































































































Search results

Summary of Contents for 68100WUSS-L

Reviews:

Related manuals for 68100WUSS-L

Brands by name

Popular brands

Dukane 68100WUSS-L, User Manual

Search results

Summary of Contents for 68100WUSS-L

Reviews:

Related manuals for 68100WUSS-L

Brands by name

Popular brands