Dukane 68100WUSS-L User Manual Download Page 75

Page: 75 / 203

3. Convenient Features

LENS CONTROL

• CONTROL

FOCUS

◀

▶

Adjust FOCUS of the projected image.

ZOOM

◀

▶

Finely adjusting the size of an image.

SHIFT

▼▲◀▶

Adjust the projected image’s vertical and horizontal position.

HOME

Return the lens shift position to the home position.

SHUTTER

Turn off the light source temporarily.

SHUTTER

Turn on the light source.

CALIB.

Correct the adjustable zoom, focus and les shift range.

• LENS MEMORY

STORE

Store the current adjusted values in memory for each input signal.

MOVE

Applies the adjusted values of LENS SHIFT, ZOOM, and FOCUS to the current
signal.

RESET

Return the adjusted valued to the last condition.

• REF. LENS MEMORY

PROFILE1/PROFILE2

Select a stored [PROFILE] number.

STORE

Store each adjusted value of LENS SHIFT, ZOOM and FOCUS for the selected
profile as the common values for every input signal.

MOVE

Move the lens to the stored values of LENS SHIFT, ZOOM, and FOCUS for the
selected profile.

Summary of Contents for 68100WUSS-L












































































































































































































Search results

Summary of Contents for 68100WUSS-L

Reviews:

Related manuals for 68100WUSS-L

Brands by name

Popular brands

Dukane 68100WUSS-L, User Manual

Search results

Summary of Contents for 68100WUSS-L

Reviews:

Related manuals for 68100WUSS-L

Brands by name

Popular brands