manualshive.com logo in svg

Dukane 68100WUSS-L, User Manual

The Dukane 68100WUSS-L User Manual is essential for unlocking the full potential of your device. With easy-to-follow instructions and comprehensive information, this manual is available for free download from our website. Get the most out of your product by accessing the manual at manualshive.com.

Share
Download
background image

Ver. 1 9/16

• Apple, Mac, Mac OS, and MacBook are trademarks of Apple Inc. registered in the U.S. and other countries.
• Microsoft, Windows, Windows Vista, Internet Explorer, .NET Framework and PowerPoint are either a registered

trademark or trademark of Microsoft Corporation in the United States and/or other countries.

• MicroSaver is a registered trademark of Kensington Computer Products Group, a division of ACCO Brands.
• AccuBlend, NaViSet, and Virtual Remote are trademarks or registered trademarks of NEC Dispolay Solutions, Ltd. 

in Japan, in the United State and other countries. 

• The terms HDMI and HDMI Hight-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered

trademarks of HDMI Licensing LLC in the United States and other countries.

• DisplayPort and DisplayPort Compliance Logo are trademarks owned by the Video Electronics Standards Associa-

tion.

• HDBaseT™ is a trademark of HDBaseT Alliance.

• DLP and BrilliantColor are trademarks of Texas Instruments.
• Trademark PJLink is a trademark applied for trademark rights in Japan, the United States of America and other

countries and areas.

• Wi-Fi

®

, Wi-Fi Alliance

®

, and Wi-Fi Protected Access (WPA, WPA2)

®

 are registered trademarks of the Wi-Fi

Alliance.

• Blu-ray is a trademark of Blu-ray Disc Association
• CRESTRON and ROOMVIEW are registered trademarks of Crestron Electronics, Inc. in the United States and

other

 

countries.

• Ethernet is either a registered trademark or trademark of Fuji Xerox Co., Ltd.
• Extron and XTP are registered trademarks of RGB Systems, Inc. in the United States.
• Other product and company names mentioned in this user’s manual may be the trademarks or registered trademarks

of their respective holders.

• Virtual Remote Tool uses WinI2C/DDC library, © Nicomsoft Ltd.
• TOPPERS Software Licenses

The product includes software licensed under TOPPERS License.

NOTES

(1)

The contents of this user’s manual may not be reprinted in part or whole without permission.

(2)

The contents of this user’s manual are subject to change without notice.

(3)

Great care has been taken in the preparation of this user’s manual; however, should you notice any
questionable

 

points, errors or omissions, please contact us.

(4)

Notwithstanding article (3), 

DUKANE

 will not be responsible for any claims on loss of profit or other matters

deemed

 

to result from using the Projector.

Summary of Contents for 68100WUSS-L












































































































































































































Reviews:

No comments

Related manuals for 68100WUSS-L

AAXA Technologies M2 Specification preview
M2
Brand: AAXA Technologies Pages: 2
Panasonic PT-CW330 Brochure & Specs preview
PT-CW330
Brand: Panasonic Pages: 4
Panasonic PT-AX100U Service Manual preview
PT-AX100U
Brand: Panasonic Pages: 74
Panasonic PT-AR100 Preliminary preview
PT-AR100
Brand: Panasonic Pages: 2
Panasonic PT-AE8000U Manual preview
PT-AE8000U
Brand: Panasonic Pages: 13
Panasonic PT-AE7000U Specification preview
PT-AE7000U
Brand: Panasonic Pages: 13
Panasonic PT-AE2000U Service Manual preview
PT-AE2000U
Brand: Panasonic Pages: 81
Panasonic PT-AE4000E Operating Instructions Manual preview
PT-AE4000E
Brand: Panasonic Pages: 36
Panasonic PT-AE2000E Spec File preview
PT-AE2000E
Brand: Panasonic Pages: 11
Panasonic PT-D3500 - XGA DLP Projector Spec File preview
PT-D3500 - XGA DLP Projector
Brand: Panasonic Pages: 5
Panasonic PT-53TWD63 Operating Instructions Manual preview
PT-53TWD63
Brand: Panasonic Pages: 41
Panasonic PT-AE4000 Specification Sheet preview
PT-AE4000
Brand: Panasonic Pages: 10
Panasonic PT52DL10 - 52" DLP REAR PJ HDTV Operating Instructions Manual preview
PT52DL10 - 52" DLP REAR PJ HDTV
Brand: Panasonic Pages: 76
D-ILA FDP-DILA3 Instructions Manual preview
FDP-DILA3
Brand: D-ILA Pages: 57
Dukane ImagePro 8064 Specifications preview
ImagePro 8064
Brand: Dukane Pages: 2
Walimex Pro Roll-up Panel Manual preview
Roll-up Panel
Brand: Walimex Pro Pages: 21
Elite Screens Aeon CineGrey 3D AT Series User Manual preview
Aeon CineGrey 3D AT Series
Brand: Elite Screens Pages: 8
Draper FocalPoint Instructions preview
FocalPoint
Brand: Draper Pages: 2

Brands by name

Popular brands

Load more brands