background image

Portable Projector 

NP09CM Ceiling Mount Unit 

Installation and Adjustment Manual 

Thank you for your purchase of the NEC portable projector ceiling mount unit. 
Please read this installation and adjustment manual carefully to ensure proper use. 

Special skills are required for the installation of the portable projector. 
This work should never be performed by the customer. 

To the Dealer and the Installer 

For the safety of the customer, we ask that the installation work be started
after careful attention is paid to the strength of the mounting location to be
sure it will withstand the weight of the portable projector and mounting
hardware. 

Printed in Japan

NP09CM-0801K-01

CONTENTS 

Heed the Following  ....................................................................................2 
Preparation ..................................................................................................4 

List of Packaged Parts ......................................................................................4 

Required Tools...................................................................................................4 

Names of the Parts ............................................................................................4 

Dimensions ........................................................................................................5 

Guide to Screen Size and Projector Mounting Position..........................6 

Screen Size and Projection Distance (NP200/NP100) ....................................6

Screen Size Conversion Table (NP200/NP100) ...............................................7 

Mounting the Projector...............................................................................8 
Replacing the Lamp ..................................................................................11
Adjustment of the Projection Angle ........................................................12 

Distortion Adjustment .....................................................................................12 

Fine Adjustment...............................................................................................14

Specifications............................................................................................14 

PRINTED WITH

SOY INK

T M

Printed on recycled paper.

NP09CM̲E  08.2.15 5:37 PM  ページ 1

Summary of Contents for NP09CM

















Reviews: