![background image](http://html1.mh-extra.com/html/ducati/superbike-848evo-corse/superbike-848evo-corse_owners-manual_2537773106.webp)
105
Lubricating cables and joints
Check the outer sheath of the throttle control cables
for damage at regular intervals. The outer plastic
cover should not be flattened or cracked. Work the
controls to make sure the cables slide smoothly
inside the sheaths: if you feel any friction or catching,
have the cable replaced by a Ducati Dealer or
Authorised Service Centre.
To avoid this kind of problem with the throttle cable,
unscrew the two retaining screws (1, fig. 71) to open
the case and then grease cable ends and pulley with
SHELL Advance Grease or Retinax LX2 grease.
Warning
Close the case carefully after threading the
cables onto the pulley.
Refit the cover and tighten the screws (1) to 10 Nm.
To ensure smooth operation of side stand joint, clean
off any dirt and apply SHELL Alvania R3 at all points
exposed to friction.
1
fig. 71
Summary of Contents for Superbike 848evo Corse
Page 1: ...cod 913 7 205 1A...
Page 2: ...1 ENGLISH Owner s manual...
Page 143: ...Stampato 10 2012 Cod 913 7 205 1A...
Page 144: ...cod 913 7 205 1A...