47
page 7: the display will show “Setup LEV. 7“.
If you wish to set this level, press switch (12, fig. 6)
in position B “
▼
” for 3 seconds; the instrument panel
will automatically quit this page and return to the
initial display, with the level setting indicated on the
right.
If instead you wish to set the next highest level,
press switch (12, fig. 6) in position B “
▼
”. While if
you wish to go back to the previous level, press
switch (12, fig. 6), in position A “
▲
”.
page 8: the display will show “Setup LEV. 8“.
If you wish to set this level, press switch (12, fig. 6)
in position B “
▼
” for 3 seconds; the instrument panel
will automatically quit this page and return to the
initial display, with the level setting indicated on the
right.
If instead you wish to set the next highest level,
press switch (12, fig. 6) in position B “
▼
”. While if
you wish to go back to the previous level, press
switch (12, fig. 6), in position A “
▲
”.
If DTC is activated, the level setting can also be
displayed when quitting the page “SETUP DTC” at
the end of the TOT, TRIP A, TRIP B and TRIP Fuel
display functions.
The level setting will remain in memory even after
Key-Off.
If, however, battery power is suddenly cut off (Batt-
OFF), when battery power is restored and upon next
Key-On, the Traction Control will no longer be
activated (DTC OFF).
Summary of Contents for Superbike 848evo Corse
Page 1: ...cod 913 7 205 1A...
Page 2: ...1 ENGLISH Owner s manual...
Page 143: ...Stampato 10 2012 Cod 913 7 205 1A...
Page 144: ...cod 913 7 205 1A...
