Ducati Superbike 848evo Corse, Owner'S Manual, Page: 77 / 144

76
To set the rear brake pedal, proceed as follows.
loosen counter nut (4).
Turn pedal travel adjusting screw (5) until pedal is in
the desired position.
Tighten the check nut (4) to 2.3 Nm.
Work pedal by hand to make sure it has 1.5 - 2 mm
free play before brake begins to bite.
If not so, set the length of cylinder linkage as follows.
Loosen the check nut (6) on cylinder linkage.
Tighten linkage into fork (7) to increase play, or
unscrew linkage to reduce it.
Tighten the check nut (6) to 7.5 Nm and check play
again.
7
4
5
6
fig. 44