Ducati Superbike 848evo Corse, Owner'S Manual, Page: 76 / 144

75
Setting the gear change and rear brake
pedals
(fig. 43 and fig. 44)
The gear change and rear brake pedals can be
adjusted to suit the preferred riding position of each
rider.
To adjust the position, proceed as follows:
hold the rod (1) and loosen lock nuts (2) and (3).
Note
Nut (2) has a left-hand thread.
Fit an open-end wrench to hexagonal element of
linkage (1) and rotate until setting pedal in the desired
position.
Tighten both check nuts onto linkage.
2 1 3
fig. 43