background image

31

MANUFACTURER'S LIMITED WARRANTY CONDITIONS

1) The warranty is valid only if it is attributable to an original defect of the product.

2) Warranty period: 24 months from the date of sale.

3) If, during the period of this limited warranty, the product appears to contain a defect covered by this warranty, the customer must follow the after-sales service procedure.

4) The manufacturer's obligations are limited to repairing or, at its option, replacing defective parts / components due to an inherent defect in the product or component. Refund for a 

defective product is never applicable. Defective parts will be repaired or replaced with new parts at the manufacturer's discretion.

5) Transportation, handling or installation costs related to this product, for any reason, including the cost of returning parts for inspection and after-sales service under warranty or out 

of warranty, are not included in the warranty and are payable. Due to the manufacturer.

6) The warranty is void immediately if the product has been modified, manipulated or adapted in any way, the guarantee is void immediately if the product has been installed or used 

in a structure that does not comply with the manufacturer's instructions for installation and use. No reimbursement is granted for direct or indirect damages resulting from the afore-

mentioned changes.

7) The warranty does not cover under any circumstances:

a) Costs of installation, periodic checks, maintenance, relocation, reinstallation of a repaired or replaced unit.

b) Parts subject to wear such as: fuses, cells, batteries, carbon brushes, light bulbs, etc. They are never included in the warranty.

c) Transportation, handling or installation costs related to this product, for any reason, including the cost of returning parts for inspection and after-sales service under warranty or out 

of warranty, are not included in the warranty and are payable only at the customer's expense. Problems caused by improper use or in non-ideal or non-standard construction, user 

error, damage not due to failure, damage caused by improper installation or operation, including unauthorized repairs or any other alteration of the product, are not covered from 

guarantee.

d) Damage caused by fire, moisture, water, natural phenomena, electrical storms, radio interference or other interference from other electrical devices; short circuit or any failure resul-

ting from incorrect power supply, or variation of the supply voltage, or any other cause beyond the manufacturer's control.

8)Proper operation of the device will depend on compliance with the manufacturer's installation, operation and maintenance instructions.

9) Under no circumstances can the manufacturer be held responsible for any direct or indirect incidental damage or cost deriving from the use or inoperability of the product. Any 

problems / after-sales assistance, even if they fall within the warranty conditions, do not grant any right to financial compensation to the manufacturer, nor any right to issue debit notes 

or refund requests.

Warranty conditions and after sales service

DUCATI

  

Guarantee 

Summary of Contents for SLIDE 1043/24V



































Reviews: