![background image](http://html1.mh-extra.com/html/ducati/multistrada-1200/multistrada-1200_owners-manual_2537805233.webp)
Top-ups
TOP-UPS
TYPE
Fuel
tank, including a reserve of 4 cu. dm
(litres)
Unleaded fuel with a minimum octane rat-
ing of RON 95.
20.0 cu. dm (litres)
Sump and filter
SHELL - Advance 4T Ultra
4.10 cu. dm (litres)
Front/rear brake and clutch circuits
SHELL Advance Brake DOT 4
-
Protectant for electric contacts
SHELL Advance Contact Cleaner
-
Front fork
SHELL Advance Fork 7.5 or Donax TA
720 cc, per leg (*)
Cooling circuit
ENI Agip Permanent Spezial antifreeze (do
not dilute, use pure)
2.3 cu. dm (litres)
(*) The value refers to the air column between the free surface of the oil and the end of the sleeve, with the
latter fully lowered and without the preload pipe and spring inside the fork leg.
Important
Do not use any additives in fuel or lubricants. Using them could result in severe damage of the engine
and motorcycle components.
Warning
The vehicle is only compatible with fuel having a maximum content of ethanol of 10% (E10).
Using fuel with ethanol content over 10% is forbidden. Using it could result in severe damage of the engine
and motorcycle components. Using fuel with ethanol content over 10% will make the warranty null and void.
232
Summary of Contents for Multistrada 1200
