4 / 17
Installation Manual for DualSun PV Modules
H, M or L (H means the highest current level). The best practice is to install modules with the
same current level (such as H) in one strand in the process of installation.
3. Serial No.: Each module has a unique serial number which is solidified inside the module
permanently and it can be seen from front top of the module. Each serial number is put in before
laminating of the module. In addition, you can find the same serial number on the module
nameplate.
1
Frame
2
glass
3
EVA
4
cell
5
backsheet
6
silicon
7
Connecting
box
8
Nameplate
9
Cables
10
Connector
11
Mounting
hole
12
Grounding
hole
13
Leakage
hole
14
Figure 1
Module Section Structure and Components
3.2
Regular safety
DualSun module is considered to be in compliance with IEC61730 only when the module is
mounted in the manner specified by the mounting instructions below.
When the module is installed on roof, it is necessary to take the overall fire rating of the finished
structure as well as later overall maintenance into account. The roofing PV system shall be installed
after assessment by construction experts or engineers and with official analysis results for the entire
structure. It shall be proved capable of supporting extra system bracket pressure, including PV
module weight.
For your safety, please do not work on the roof without safety protective measures which include
but not limited to fall protection, ladder or stair and personal protective articles.
For your safety, please do not install or handle modules in unfavorable conditions including but
not limited to strong wind or gust, damp or sandy roofs.
