WFQT130005
10
V4.1B
STEP
3
(Optional Direct Connect)
Connect Water Lines
1
Disconnect the top of the cold water plumbing line from the faucet shank. Ensure cold water shut-off valve is closed, and turn on
cold water on faucet.
2
Screw the optional KFA onto the lower end of the faucet shank and upper end of cold water line (adapter is included in
Auxiliary Faucet).
3
Note position of optional KFA as attached to cold water line.
STEP
4
(Optional Direct Connect)
Connect 1/4" Plastic Tubing
FROM SYSTEM HEAD INLET TO 3/8" FEMALE OD ADAPTOR:
1
Determine the length of 1/4" Plastic Tubing
F
that will be necessary to connect the System Head Inlet to the 3/8" Female OD Adaptor
at the shut-off valve. Make sure to allow enough 1/4" Plastic Tubing to prevent kinking in the line.
2
Cut the 1/4" Plastic Tubing squarely on both ends.
3
Wet one end of the 1/4" Plastic Tubing with water and push it into the System Head Inlet until it stops.
NOTE: Do not bend or crimp 1/4" Plastic Tubing when inserting.
4
Wet the other end of the 1/4" Plastic Tubing with water and push it into the 3/8" Female OD Adaptor until it stops.
NOTE: Do not bend or crimp 1/4" Plastic Tubing when inserting.
FROM SYSTEM HEAD OUTLET TO 3/8" MALE OD ADAPTOR:
5
Determine the length of 1/4" Plastic Tubing
F
that will be necessary to connect the System Head Outlet to the 3/8" Male OD Adaptor
on the lower end of the plumbing line. Make sure to allow enough 1/4" Plastic Tubing to prevent kinking in the line.
6
Cut the 1/4" Plastic Tubing squarely on both ends.
7
Wet one end of the 1/4" Plastic Tubing with water and push it into the System Head Outlet until it stops.
NOTE: Do not bend or crimp 1/4" Plastic Tubing when inserting.
8
Wet the other end of the 1/4" Plastic Tubing with water and push it into the 3/8" Male OD Adaptor until it stops.
NOTE: Do not bend or crimp 1/4" Plastic Tubing when inserting.
3
KITCHEN FAUCET
COLD WATER
VALVE
HOT WATER
VALVE
COLD WATER
VALVE
COLD WATER
VALVE
OUTLET
PORT
INLET
PORT
3
A
A
4
INLET
OUTLET
F
F
INLET
OUTLET
7
