-
jumper
POWER
Con
fi
guration of the photocell transmitter power.When using photocells in a place where
there may be interference in operation, caused by re
fl
ections from walls or other objects,
making it di
ffi
cult to detect an obstacle (e.g. installation in rooms, installation on a garage
door), reduce the signal strength in the transmitter by setting the jumper to the LOW position.
jumper in
position reduced transmitter signal strength, setting for
LOW
installations with interference caused by re
fl
ections from walls or other
objectsthe
jumper in the
position works with the nominal signal power of the
HI
transmitter
-
jumper
lamp module breaker
Con
fi
guration of the lamp module operation mode to continuous or pulsed.
jumper o
ff
- continuous operation mode
jumper on - impulse mode
HI LOW
POWER
HI LOW
POWER
