4.Configuration of the photocell
Photocell operating parameters must be set using the con
fi
guration jumpers.
POWER
jumper
SYNCH
jumper
breaker jumper
receiver RX
transmitter TX
-
jumper
SYNCH
Con
fi
guring the synchronization function.
SYNCH
OFF
jumper in the
position - synchronization function disabled,
setting for the installation of one pair of photocells.
SYNCH
ON
jumper in
position - synchronization function enabled, setting
for mounting two pairs of photocells.
For proper operation of the photocells the jumpers must be set in the same position on the
transmitters and the receiver.
ON OFF
ON OFF
SYNCH
SYNCH
Fig. 2
Configuration elements of the photocell.
ON OFF
SYNCH
ON OFF
SYNCH
HI LOW
POWER
EN
