1.General information
A photocell consists of a transmitter and a receiver. Available in the SLIM3 version and in the
SLIM3 LED version equipped with a lamp module. Additional optical signaling serves as a
warning and makes it easier to locate the entrance in conditions of poor visibility.The receiver
has NC and NO type control contacts, the circuit of which is protected by an additional relay.
The photocell is designed to work in gate systems as a safety element working outside.
2.Technical data
Basic parameters
•
external dimensions of the housing
(width x depth x height):
37x36x120mm
•
mounting method:
surface-mounted, splash-proof housing, IP-54
•
case material:
polycarbonate
•
working temperature (min./max.): -20 °C / + 55 °C
•
weight:
80g
•
guaranteed operating range:
1-15m
•
transmitter and receiver
power supply:
12 ... 24VAC / DC ± 10%
•
receiver current consumption:
max. 25mA
•
transmitter current consumption: max. 25mA
Signal lamp parameters (LED version)
•
signal lamp power supply:
12 ... 24VAC / DC ± 10%
•
power consumption:
max. 150mA
•
operating modes:
continuous or pulsed, built-in circuit breaker
•
technology:
LED
•
shock and vibration resistance:
high
Executive elements
•
contact outputs
(type / maximum load):
NO or NC / 1A (24VAC / DC)
Functionality
•
adjustable viewing angle:
180 ° horizontally in the transmitter and receiver,
allows the installation of the photocell on a plane
parallel to the gate
•
user interface:
hardware interface on two LEDs indicating power
connection and facilitating synchronization of the
transmitter beam with the receiver
•
additional protection:
the output system with an increased degree of safety
(in the event of damage, the photocell output always
goes into the violation state)
•
synchronization function:
protection against interference between two pairs of
photocells, requiresAC power
EN
