Version 4/5/6/7
DTDAUTO VIETNAM Co., Ltd – EDITED 29/10/2020
www.dtdauto.com
35
Enter “
07A
” fault code into MOTODATA software to view code fault content
and fault position on electronic wiring diagram.
After execute “Read code” if ECU has not stored fault codes then the screen
displays as below:
NOTES:
- Now, this function used for HONDA, YAMAHA PGM/FI-FI motorcycles. Next
update, it will support for other brands.
- This function uses event-driven advanced diagnostic solution. It can find
hard faults that MIL lamp does not indicate.
Press “
Enter/ YES
” button, the screen will be displayed list of troubles that
your motorcycle can occur:
Version 4/5/6/7
DTDAUTO VIETNAM Co., Ltd – EDITED 29/10/2020
www.dtdauto.com
36
Press “
Shift Down and Up
” button to view list of troubles.
Press “
Enter/ OK
” button to select a trouble that your motorcycles is
occurring, next you do the steps following instruction on the screen until
the end result screen shows.
3.2 CLEAR FAULT CODES IN ECU MEMORY
This function used to clear fault codes stored in the ECU to complete the
repair or delete virtual fault codes stored in the ECU memory.
Step 1
: From the screen displays models of brand, select a model of the
motorcycle
(Example: LEAD 110)
then press "
Enter/ OK
" button. The
screen displays function table.
Step 2
: Press
“Shift Down and Up”
button to select "
CLEAR CODE
”
menu then press “
Enter/ OK
" button.
