Version 4/5/6/7
DTDAUTO VIETNAM Co., Ltd – EDITED 29/10/2020
www.dtdauto.com
75
Step 6:
The screen displays as below:
You ignore this report and press
“
Select/ OK
”
to continue because
MOTOBOX
connected to
MOTOSCAN
.
Step 7:
When
MOTOBOX
connected to
ECM
of motorcycle, the screen
displays software version inside ECM and software version inside
MOTOBOX.
If software version in
MOTOBOX
is newer version in ECM of motorcycle
then you should update a new version for ECM.
If software version in
MOTOBOX
like as version in ECM of motorcycle that
ECM software is faulty then you need update software for ECM.
Step 8:
After you check software version in memory card, the screen
display as below:
Version 4/5/6/7
DTDAUTO VIETNAM Co., Ltd – EDITED 29/10/2020
www.dtdauto.com
76
If you want update data for ECM then you press “
Select/ OK
” button.
Step 9:
The screen displays the request:
NOTE:
When you are programming ECM, you do not turn off ignition key or
disconnect battery. These can make error data inside ECM so you must
check power before program ECM, then press “
Select/ OK
” to continue.
Step 10:
The screen displays data loading progress into ECM by
percentage:
If upgrading ECM is not successful then the screen displays as below