Version 4/5/6/7
DTDAUTO VIETNAM Co., Ltd – EDITED 29/10/2020
www.dtdauto.com
37
If you sure that you want to clear fault codes, press the "
Enter/ OK
"
button.
If you do not want to clear fault codes, please press "
Exit / Cancel
"
button.
IMPORTANT NOTES:
After the repairs and parts replacement, you need to run motorcycle in the
loading, fast speed of engine about 15 minutes to heat the engine. Read
fault codes more times, if fault codes still show on MOTOSCAN, means your
repairs not completed, you need to review.
If not any fault codes show on MOTOSCAN then repair you have done.
Check results with the scanner again if necessary...
3.3 RESTORE SOFTWARE IN ECU
Now, this function supports for HONDA, PIAGGIO motorcycles. It used to
restore software in ECU to manufacturer’s original state. When you execute
this function, you need execute in accordance with the instructions on
screen of MOTOSCAN. Especially, you need start engine for 10 minutes
after restoring to have ralenti again.
Step 1
: From the screen displays models of brand. Select a model of the
motorcycle
(Example: LEAD 110)
then press "
Enter/ OK
" button. The
screen displays function table.
Step 2
: Press
“Shift Down and Up”
button to select "
RESTORE ECU
”
menu then press “
Enter/ OK
" button.
Version 4/5/6/7
DTDAUTO VIETNAM Co., Ltd – EDITED 29/10/2020
www.dtdauto.com
38
Step 3
: Press
“Shift Down”
button to view full instructions:
3.4 VIEW LIVE DATA
This function used for the purpose of inspection and analysis of input signal
circuit
(INPUT)
of the ECU to determine difficult fault that OBD automatic
mode cannot be determined.
Step 1
: From the screen displays models of brand, select a model of the
motorcycle to view live data
(Example: LEAD 110)
then press "
Enter/ OK
"
button. The screen displays function table.