5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
TM
O
WNER
'
S
M
ANUAL
Front Panel
(1) Microphone connector – XLR with automatic insertion detection.
(2) 6.3mm Headphone connector with automatic insertion detection.
(3) IR receiver and stand-by indicator light. The indicator is lit during stand-by mode.
(4) Display.
(5) Control wheel and wheel button for menu control.
Also see the remote control section.
Rear Panel
(1) Power cable connector.
(2) Thermometer, Service, and 12V Trigger output connectors.
(3) USB host port for firmware update using a USB memory stick.
(4) Coaxial and optical digital output connectors CO, DO.
(5) USB audio connector for computer audio using USB A-B cable.
Notice
: The X4 input must be selected to be USB for the computer to be able discover the device.
(6) Coaxial digital S/PDIF inputs C1, C2, C3.
(7) Optical digital S/PDIF (Toslink) inputs D1, D2, D3.
Notice
: You can connect CD/DVD players, TVs, media servers, and other audio sources to the digital
inputs as long as they provide uncompressed linear PCM audio. Compressed formats are not supported.
(8) RCA Analog stereo inputs A1, A2. Left channel input at the top, Right at the bottom.
(9) XLR Analog stereo input A3.
(10) Auxiliary XLR and RCA outputs O2 –
both XLR and RCA outputs carry the same signal.
(11) Primary XLR and RCA outputs O1 –
both XLR and RCA outputs carry the same signal.
Rev. 1.0
2018-03-14
Page 5 (24)
MODEL NO
2
3
4
5
6
7
8
9
10
11
1
