TM
O
WNER
'
S
M
ANUAL
5.Menu Details
Anti-Mode
TM
Settings Menu
C
OMPENSATION
G
AIN
”Compensation Gain” compensates for the overall difference in bass energy when peaks in
response are removed. This is a matter of personal preference, so this setting is the first to
adjust if after calibration you perceive too much or too little bass. The frequency limit for the
compensation filter is dependent on the correction limit, but it doesn't exceed 500Hz.
C
ORRECTION
R
ANGE
”Correction Range” sets the frequency limit for the automatic Anti-Mode
TM
correction.
Frequencies above the limit are not altered. At any time after calibration, the correction range
can be changed to your preference. A new correction is created from the stored measurement
data of the current profile without needing to measure again.
V
IEWING
ROOM
RESPONSE
AND
CORRECTIONS
”Before / After” and ”User Measurements” show the measured room responses, if they have
been measured for this profile. You can scroll the cursor with remote or using the control wheel,
and zoom the response by rotating while keeping the wheel button pressed.
S
MOOTH
G
RAPH
”Smooth Graph” configures whether smoothing is applied when displaying responses. Having
smoothing on is usually appropriate when considering how the response sounds to the human
hearing, especially at the higher frequencies.
Rev. 1.0
2018-03-14
Page 15 (24)
