TM
O
WNER
'
S
M
ANUAL
Bypass Mode
Press and hold the Bass key
2
to enter the bypass mode. In this mode, Anti-Mode room correction
is not in effect. However, note that some enhancements made by the system are still in effect
despite the bypass mode (crossovers, speaker level matching, etc).
Press any button to leave the bypass mode.
Mute, Standby Mode
Audio output can be muted temporarily by pressing the red button on the remote
1
. To conserve
power, the system will automatically enter the standby mode after some time has elapsed while
muted. This also means that it is enough to press the red button shortly to end a listening
session.
Press and hold the button for a short while to enter the standby mode immediately.
While muted, press the red button again to unmute.
While in standby mode, press the red button to turn on the unit.
Shaping Sound: Bass Compensation
Bass compensation control can be found in the “Anti-Mode” section of the main menu. Adjusting
Compensation will affect the low frequency range that has been corrected by the Anti-Mode
algorithm. Room modes typically dominate low frequencies. When Anti-Mode removes the
modes, the resulting sound may appear too “bright” on occasion. Bass compensation allows the
user to conveniently shape the bass response to suit their personal taste.
Notice: to have more control over the shape of the target response, Bass Tilt or Parametric EQ
can be applied in addition.
Shaping Sound:
Bass Tilt
Bass tilt controls can be found in the “Sound” section of the main menu. Bass tilt is a powerful
shelve-type filter that can be applied to shape the target response at low frequencies. It has two
parameters: gain and bandwidth. The parameters can be adjusted with the control wheel (hold
down and rotate the wheel to adjust bandwidth) or using the remote controller. Profile buttons A
and C will adjust the bandwidth. The effect of the filter can be heard in real-time.
To turn off bass tilt, simply set its gain to + 0 dB.
2 Function only available at the home screen
Rev. 1.0
2018-03-14
Page 10 (24)
