CONFIGURATION MANUAL
Video recorders DX Series
Page:
26
Page:
26
DSE SRL - ITALY - WWW.DSE.EU
● ALARM CMS - Section to be used to send alarms to a centralized alarm station
● WIRELESS 3G - This section allows you to manage a 3G dongle plugged into a USB port on your DVR to gain access to the Internet.
E 'can set the type of key and access data. To ensure compatibility with the procedure for accessing the ISP is still buying advice along
with the stick a 3G router that provides a number of network ports to connect the DVR.
● COLL. MOBILE - System port. Do not change the factory setting 34599.
● UPNP - The protocol Universal Plug'n'Play (abbreviated UPNP) is a protocol that allows the DVR to communicate with other network
equipment and perform control operations on other equipment. If you enable UPN function, the DVR will be visible between the network
resources of the network PC and can also be configured by only the mapping of ports on the router to allow access from the outside (if
your router supports and enables the function).
And 'possible to specify the ports that the DVR will try to automatically map inside the router.
This function, a major bike time, has now been superseded by our P2P cloud servers that allow remote access without port mapping.
● WIFI - Not supported
● RTSP - E 'can access the DVR remotely and get the only RTSP video streaming. And 'possible to enable this protocol and define the
port (usually 554)
● CLOUD - DVRs include the ability to remotely access through our free cloud servers that allow you to avoid DDNS subscriptions and
router ports mapping. Here you can enable or disable the sending of the connection data from the DVR to the server.
● PMS - function under development currently unavailable
MENU OSD / ALARMS
Alarm Configuration
