manualshive.com logo in svg

DSE DX Series, Configuration Manual

Share
Download
DSE DX Series Configuration Manual Download Page 9

CONFIGURATION MANUAL

Video recorders DX Series 

Page:

 9   

Page:

 9   

DSE SRL - ITALY - WWW.DSE.EU 

ICONS OF CHANNEL STATE

Each camera pane shows the overlays provided in configuration and some icons that reveal the input status as per the following table 

Icon 

Description  

Video offline or 

absent 

Recording in 

progress  

Blindness camera in 

progress 

Motion 

detection 

activated  

Audio playback 

MULTIVISION CONTROL 

To bring a camera full screen just double click on it. With a new double click to return to the multiple vision. You can select different 

screen layout options with the right-most button in the taskbar.

DIGITAL ZOOM 

The DVR DH series are equipped with a very advanced zoom function that allows you to easily zoom in the particular interest in both live 

viewing and playback. The digital zoom function works only in full screen view of a single camera. To zoom drag the mouse in the 

camera frame to fit around a particular interest. Then just click on the track pane. To turn off the display double click again.

ACTIVATE AUDIO 

The default audio playback of the individual channels is disabled. To unmute, click the icon of the channel speaker  

PTZ CONTROL 

To control a motorized camera must first set the control parameters in the configuration menu (see below).  

Summary of Contents for DX Series
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands