CONFIGURATION MANUAL
Video recorders DX Series
Page:
28
Page:
28
DSE SRL - ITALY - WWW.DSE.EU
● CHANNEL - Each video input has an independent motion detection setting
● ENABLE - Ticcare if you want to manage motion detection of this channel
● SENSITIVITY '- Adjusts the sensitivity of detection (6 levels). Carry out tests to verify that the detection occurs punctually but
discriminating the greatest possible amount of inappropriate timing causes.
● AREA - Press SET and define the area to be considered in the survey. The active area is marked by the pink.
● BAND - E 'can enable the detection of movement only in certain time slots in the week. You can define 4 time slots for each happend
of the week.
● INTERVAL - Defines the duration of the event that flows from the detection (from 1 to 600 sec.)
● ALARM OUTPUT - Clicking the output pane so that white color is expected the rear output activation to occur intrusion
● TERM - Defines the alarm output activation time
● RECORD CHANNEL - Highlight white channels which you want to start recording the occurrence of the intrusion.
● SEQUENTIAL - Upon the occurrence of intrusion can lead to full-screen camera automatically. If you highlight multiple cameras in
white they will be shown in a cyclic sequence. Nell GENERAL / TOUR section (second section) can set the dwell time of each camera in
the scan in alarm.
● ACTIVATION PTZ - E 'possible to control the automatic movement of motorized cameras implant following the detection. For each
channel you can call
