manualshive.com logo in svg

DSE DX Series, Configuration Manual

Share
Download
DSE DX Series Configuration Manual Download Page 39

CONFIGURATION MANUAL

Video recorders DX Series 

Page:

 39   

Page:

 39   

DSE SRL - ITALY - WWW.DSE.EU 

the first thing to do once you turn the DVR to allow it to record. Without you format the disk the DVR will not be able to save any videos.

If as a result of important recorded events you want to prevent deleted vengaa nothing you can press the READ ONLY button so that the 

DVR can not write to disk but only read. Press READ / WRITE to return to normal recording condition. If the DVR has two disks you can 

set one as RAID ie as an emergency HDD for data backup. In programming it is possible to define which cameras will be recorded 

simultaneously on 2 disks to take shelter from data loss in the event of a disk failure.

It 'also available PARTITION button to divide a disk into two partitions: one for recording and one of definable size, archive snapshot 

images saved. 

OSD MENU / SYSTEM / CONFIG PTZ 

the control protocol settings tel. speed dome analog

DX Series DVRs are able to control the movement of motorized speed-dome cameras with the mouse, the keyboard of the DVR and 

even remotely connected with the browser or mobile devices.  

Local motorized cameras are controlled through the rear RS485 serial port by following the instructions in the relevant installation manual. 

It is not necessary this setting to control speed IP dome.

This section sets the protocol to be used to control speed dome camera sites 

Summary of Contents for DX Series
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands