Controls and Indications
49
5.3.2.1 SUMMARY SECTION
The content of the area is arranged as shown in the examples below. This serves as an overview of
the viewed DSE Controller. Further information is viewed using the Instrument Pages as detailed
below.
5.3.2.1.1 WHEN CONNECTED TO DSE8X10 CONTROLLER
5.3.2.1.2 WHEN CONNECTED TO DSE8X20 CONTROLLER
5.3.2.1.3 WHEN CONNECTED TO DSE8X60 CONTROLLER
5.3.2.1.4 SYNCHROSCOPE DISPLAY
During synchronisation, the kW and kVAr percentage bars are replaced by the synchroscope as
shown below.
Voltage difference
between the two
supplies.
Frequency difference
between the two
supplies.
Phase of the two supplies. 0
°
/ 360
°
is the
centre of the display. -180
°
/ +180
°
is at
the edge of the display.
The configured acceptable phase check
window is shown by the green arrows.
The green bars appear when the phase is
within these limits.
Percentage
of Loading
= Within configurable limits.
/
= Above or below limits
! = it is currently not possible
to show the phase of the
supplies. One of the supplies
may not be available.
