Specification
11
3.7.1 COMMUNICATION PORT USE
3.7.1.1 USB CONNECTION
3.7.1.1.1 USB SLAVE PORT (FIRMWARE UPDATE)
NOTE: For further details of module configuration, refer to DSE Publication: 057-128
DSE8005 SCADA Suite Software Manual.
NOTE: DSE stock 2 m (6.5 feet) USB type A to type B cable, DSE Part Number: 016-125.
Alternatively, they are purchased from any PC or IT store.
Using the DSE Configuration Suite Software, the USB slave port provides a simple means of
connection between a PC and the controller to perform a firmware upgrade.
To connect a module to a PC by USB, the following items are required:
•
DSE8004 Controller
•
DSE Configuration Suite PC Software
(Supplied on configuration suite software CD or
available from www.deepseaplc.com).
•
USB cable Type A to Type B.
(This is the same cable as often used between a PC and
a USB printer)
3.7.1.1.2 USB HOST PORT (CONFIGURATION)
NOTE: For further details of module configuration, refer to DSE Publication: 057-128
DSE8005 SCADA Suite Software Manual.
USB Type A connection for connection to an external USB storage device with a maximum size of
16 GB to provide a means of uploading the configuration file to the module
