5
2.4 Connect the PC5132-RS Receiver
CAUTION: Remove all power from the system while connecting modules to the
Keybus.
Connect the PC5132-RS to the four-wire Keybus of the control panel according
to the following diagram.
After you have completed the wiring, re-connect the power to the security
system. Once power is restored, the system will automatically detect the
presence of the new module.
Now that you have wired the PC5132-RS and installed the antennas, you should
enroll and program the wireless devices. See section 3 for instructions.
S E T U P & W I R I N G