14
4.4 PC5132-RS Software Default
Returning the PC5132-RS programming to factory default settings is a quick
way to remove all the enrolled devices from the system and reset all the
programming in section [804].
NOTE: Performing this procedure will not change any programming sections
except [804]. Resetting the control panel to factory default settings will not re-
turn the PC5132-RS module to factory default settings.
To restore the PC5132-RS programming to the factory default settings, perform
the following:
1. Enter [
✱
][8] [Installer’s Code].
2. Enter programming section [996].
3. Enter the Installer’s Code, followed by [996] again. The software for the
PC5132-RS will be restored to its factory default settings.
For instructions on restoring the default programming of the control panel or any
other connected module, see your system Installation Manual.
Now that you have completed all PC5132-RS related programming, you can test
and mount the receiver and devices. See section 5 for more information.
O T H E R P R O G R A M M I N G