GS3125/GS3105
5
G
G
G
G
G
INTRODUCTION
Devices in the GS3105 and GS3125 series are GSM communicators which, in the absence of a PSTN line, transmit vocal or digital alarms
to System III or System II receivers, via GPRS. You can have the following items for each series:
— The
GS3105-K
and
GS3125-K
kits, including GSM/GPRS communicator, antenna with cable from 2 meters, metal bracket and
PCLINK-PCLINK cable;
—
The
GS3105-BA
and
GS3125-BA
kits, including GSM/GPRS communicator, antenna with 25 cm wire, casing and PCLINK-PCLINK cable.
—
The
GS3100-BX
kits, including antenna with 25 cm wire and casing.
All information relating to a specific version shall be attested to by reference to the the corresponding code. The word “Communicator” is
being used to describe functions which are common to the various versions.
This manual provides programming and operation of the GSM/GPRS alarm Communicator. If there are any special installation require-
ments, the remote
ANT-EU
outdoor antenna may be used.
This Device is fixed and shall be installed by Service Persons only (service person is defined as a person having the
appropriate technical training and experience necessary to be aware of hazards to which that person may be exposed
in performing a task and of measures to minimize the risks to that person or other persons). It shall be installed and
used within an environment that provides the pollution degree max 2, over voltages category II, in non-hazardous,
indoor locations only. This manual shall be used with the Installation Manual of the alarm control panel. All instruc-
tions specified within that manual must be observed.
Features
Models
GS3105-K, GS3125-K
GS3105-BA, GS3125-BA
Input Voltage
between 10 and 27.6 V
_
Standby current
100 mA maximum (not including the outputs) at 13.8 Vdc
Maximum alarm (Transmitting) current
200 mA average (not including the outputs) at 13.8 Vdc
Outputs
3 open collector, 100 mA
Operating frequency
900/1800 MHz or 850/1900 MHz
Maximum loop resistance of line between
the device connected in series on LI
1 Kohm
Maximum number of parallel devices
connected on LI
2
Operating Temperature
5 to 40 °C / 41 to 104 °F
Dimensions (WxHxD)
60.5x142x15.3 mm
(PCB only)
90x190x75 mm
(without antenna)
Weight
66 g
348 g
Simulates land line
Switches automatically to GSM Network in the event land line
trouble (line down)
Manages and signals Incoming/Outgoing calls
GSM signal indicator
3 programmable terminals as Open Collector Outputs or Input
Lines (GS3125 series only)
Land line overvoltage protection
GSM Quad-Band
Antenna with magnetic base
SMS dialer (GS3125 series only)
Voice dialer (GS3125 series only)
Supports Contact ID communication format from a connected
control panel for communication over the GPRS network
GPRS/Internet communication with receivers Sur-Gard Sys-
tem III / II
PC-programmable options
Pass-through function for connecting up to a DSC Power
Series PC1864 control panel (GS3125 series only).
11 SMS messages, each with a maximum length of 100 char-
acters (2 for each Input Line plus 4 for Status Indications and
1 Periodic), GS3125 series only
8 telephone numbers (max. 16 digits) programmable for the
SMS dialer (GS3125 series only)
4 phone numbers programmable for Contact ID Dialer on GPRS
Up to 100 telephone numbers (max.16 digits) program-
mable for the remote activation of the OC output
Remote activation of the outputs through caller identification and/or
SMS transmission (SMS transmission for the GS3125 series only)
Credit balance check for pre-paid SIM CARDS (GS3125
series only)
(PTM) monitoring of communication with the control unit
Technical Specifications
The input voltage to this Communicator can be drawn from the Control Panel or provided by an external power supply (
not supplied
).
Summary of Contents for GS3100-BX
Page 75: ...GS3125 GS3105 75 I I I I I...