DSC GS3100-BX, Manual

Page: 7 / 76

GS3125/GS3105
7
G G
G G G
Fig. 2 - Fitting the Communicator board inside the control panel.
9. Checking Signal Strenght :
– make sure that at least one of the green LEDs remains lit; all green LEDs lit indicates optimal coverage;
– if the green LEDs are not illuminated, the signal strength is TOO WEAK; change the position of the antenna until you find a position
which offers acceptable signal strength, at least one LED illuminated.
10. Close the control panel cover.
 
   Connect power circuit only after the cabinet has been secured to the building or structure and has been connected
to the protective earth ground of the building.
! ! ! ! !
Before inserting or removing the SIM card, please ensure the unit is powered down.
ANT-EU Remote antenna
For details of how to fit the ANT-EU remote antenna, please refer to the instructions supplied with the product. The ANT-EU is used to
provide the Communicator a excellent GSM signal strength.
GS3105-BA, GS3125-BA or GS3100-BX
See figure 1 .
1. Mark the position of the holes [ 19 ] required to fix the metal base [ 17 ] to the wall.
2. Drill holes in the wall as marked.
3. Insert the 4 P.C.B. supports [ 16 ] into the holes on the metal base [ 27 ].
4. Feed the connection cables through the opening on the base [ 22 ].
5. Fix the metal base to the wall using wall anchors (not supplied).
! !
! ! !
Make sure you do not damage wiring or pipes in the chase.
6. Position the electronic P.C.B. (not supplied with the GS3100-BX ) on the supports [ 16 ] and push it down until it clicks into position, as
illustrated in Figure 1.
5 1
9 6
a)