DSC GS3100-BX, Manual

Page: 25 / 76

GS3125/GS3105
25
G G
G G G
 Interval : Enter the interval (HH-DD) at which subsequent periodic SMS messages are to be sent. The interval consists of the
following values:
– (HH) next message time - Select the time at which you wish to send the next periodic SMS. The interval for these values may be
set between 0 and 23.
– (DD) next message day - Select the day on which you wish to send the next periodic SMS. The interval for these values may be
set between 0 and 365.

Update time : Select this icon to get local date and time from the PC.
Voice Message (GS3125 series only)
This page can be used to record and replay the voice messages: refer to the Voice Dialer page for massage association to the events. To
open the voice message archive, click the icon to the left of the
RECORD button , on the right-hand side of the field “ WAV File#1 ”.
     The Communicator only supports WAVE audio files (.WAV), with a maximum duration of 16 seconds and with the
following specifications: PCM, 8000 Hz, 8 bit, Mono, non-compressed. Prerecorded files fulfilling the abovementioned
requirements may be used.
PLAY button - Press to listen to the voice message again.
RECORD button - Press to start recording a new voice message.
STOP button - Press to stop replaying or recording a voice message.
GET button - Press to load the recorded voice message.
SET button - Press to send the recorded voice message to the Communicator.
ERASE button - Press to delete the voice message on the Communicator.
When recording a message, a progress bar indicates (in real time) the time elapsed.
Local Voice Message Recording
     You can connect ONLY ONE telephone to the [LI] terminals for proper working of the Local Voice Message Recording.
To record a voice message from a touchtone telephone connected to the [LI] terminals, enable the Local Service Mode in the Voice
Dialler section and proceed as follows:
1. Press the

button;
2. Press the

buttons in sequence to enter record mode;
3. Enter the number of the message you wish to record (between

and

);
4. After the beep, record your voice message (the maximum duration of the message is 16 seconds).
5. Press the

button to confirm message recording (or press the

button again if you wish to stop recording the message before the
full amount of time has elapsed); you will hear a boop tone.
At this moment, any previous recordings for this message will be DELETED;
6. If you need to record any other messages, repeat the procedure described in step 1 .
Local Voice Message Replaying
 
 

You can connect ONLY ONE telephone to the [LI] terminals for proper working of the Local Voice Message Replaying.
To replay a voice message from a touchtone telephone connected to the [LI] terminals, enable the Local Service Mode in the Voice
Dialler section and proceed as follows:
1. Press the

button ;
2. Press the

buttons in sequence to enter replay mode;
3. Enter the number of the message you wish to replay (between

and

);
4. After the beep, the message will be replayed, followed by a confirmation boop tone (press the key

to stop the message playing);
5. If you need to replay any other messages, repeat the procedure described in step 1 .