DSC 3G2055, Installation Manual, Page: 42 / 52

42
S
YSTEM
O
PTIONS
[001] Ethernet IP Address
Default (000.000.000.000)
|____|____|____||____|____|____||____|____|____|____|____|____|
[002] Ethernet IP Subnet Mask
Default (255.255.255.000)
|____|____|____||____|____|____||____|____|____|____|____|____|
[003] Ethernet Gateway IP Address
Default (000.000.000.000)
|____|____|____||____|____|____||____|____|____|____|____|____|
[004] Receiver Supervision Interval
Default (0087/135) Valid range: 0000 - FFFF.
|____|____|____|____|
[005] System Toggle Options
|____| [1] Ethernet Receiver 1 Supervised
Default (OFF).
|____| [2] Cellular Receiver 1 Supervised
Default (OFF).
|____| [3] Supervision Type Default (OFF).
|____| [4] Primary Communications Path.
Default [OFF] TL2553G; [ON]3G2055.
|____| [5] Redundant Communications Default
(OFF).
|____| [6] Remote Firmware Upgrade Default
(ON).
|____| [7] Alternate Test Transmission Default
(OFF).
|____| [8] Cellular Low Signal Trouble Default
(OFF).
[006] System Toggle Options 2
|____| [1] Ethernet Receiver 1 Enabled Default
(ON).
|____| [2] Ethernet Receiver 2 Enabled Default
(ON).
|____| [4] Cellular Receiver 1 Enabled Default
(ON).
|____| [5] Cellular Receiver 2 Enabled Default
(ON).
|____| [7] DLS Over Cellular Default (ON).
|____| [8] Trouble Suppression. Default (OFF).
[007] DNS Server IP 1
i
Programming not permitted on UL/ULC listed system.
Default (000.000.000.000)
|____|____|____||____|____|____||____|____|____|____|____|____|
[008] DNS Server IP 2
i
Programming not permitted on UL/ULC listed system.
Default (000.000.000.000)
|____|____|____||____|____|____||____|____|____|____|____|____|
P
ROGRAMMING
O
PTIONS
[010] System Toggle Option
Default (CAFE) Valid range: 0000 - FFFF.
|____|____|____|____|
[011] Installer Code
Default (CAFE) Valid range: 0000 - FFFF.
|____|____|____|____|
[012] DLS Incoming Port
Default (0BF6/3062) Valid range: 0000 - FFFF.
|____|____|____|____|
[013] DLS Outgoing Port
Default (0BFA/3066) Valid range: 0000 - FFFF.
|____|____|____|____|
[020] Time Zone
Default (CAFE) Valid range: 0000 - FFFF.
|____|____|____|____|
[022] Communications Format
Default (04) Program 03 (CID), 04 (SIA).
|____|____|
[023] Panel Absent Trouble
Default (FF); Program 00 disable or FF enable.
|____|____|
[024] Panel Absent Trouble Restore
Default (FF) Program 00 disable or FF enable.
|____|____|
[025] Radio Activation Restore
Default (FF) Program 00 disable or FF enable.
|____|____|
S
YSTEM
T
EST
O
PTIONS
[026 - 029]
[026] Ethernet 1 Transmission
Default (FF) Program 00 disable or FF enable.
|____|____|
[027] Ethernet 2 Transmission
Default (00) Program 00 disable or FF enable.
|____|____|
[028] Cellular 1 Transmission
Default (FF) Program 00 disable or FF enable.
|____|____|
E
THERNET
/C
ELLULAR
P
ROGRAMMING
W
ORKSHEETS