Vigor2952 Series User’s Guide
398
IPv4 Bandwidth Limit
or
IPv6 Bandwidth Limit
Enable - Click this button to activate the function of limit
bandwidth.
IP Routed Subnet
–
Check this box to apply the
bandwidth limit to the second subnet specified in
LAN>>General Setup.
Disable - Click this button to close the function of limit
bandwidth.
Default TX limit Per User - Define the default speed of the
upstream for each computer in LAN.
Default RX limit Per User - Define the default speed of the
downstream for each computer in LAN.
Limitation List
Display a list of specific limitations that you set on this web
page.
Specific Limitation
Start IP - Define the start IPv4/IPv6 address for limit
bandwidth.
End IP - Define the end IPv4/IPv6 address for limit
bandwidth.
Each /Shared - Select Each to make each IP within the
range of Start IP and End IP having the same speed
defined in TX limit and RX limit fields; select Shared to
make all the IPs within the range of Start IP and End IP
share the speed defined in TX limit and RX limit fields.
TX limit - Define the limitation for the speed of the
upstream. If you do not set the limit in this field, the
system will use the default speed for the specific
limitation you set for each index.
RX limit - Define the limitation for the speed of the
downstream. If you do not set the limit in this field, the
system will use the default speed for the specific
limitation you set for each index.
Add - Add the specific speed limitation onto the list
above.
Edit - Allow you to edit the settings for the selected
limitation.
Delete - Remove the selected settings existing on the
limitation list.
Allow auto adjustment
…
Check this box to make the best utilization of available
bandwidth.
Smart Bandwidth Limit
Check this box to have the bandwidth limit determined by
the system automatically.
TX limit - Define the limitation for the speed of the
upstream. If you do not set the limit in this field, the system
will use the default speed for the specific limitation you set
for each index.
RX limit - Define the limitation for the speed of the
downstream. If you do not set the limit in this field, the
system will use the default speed for the specific limitation
you set for each index.
Time Schedule
Index (1-15) in Schedule Setup - You can type in four sets of
time schedule for your request. All the schedules can be set
previously in Application >> Schedule web page and you can
use the number that you have set in that web page.
Summary of Contents for Vigor 2952 series
