DryTek Vigor 2952 series User Manual Download

Page: 324 / 811

Vigor2952 Series User’s Guide

312

Action

Display the packets to be passed /blocked.

CSM

Display the content security managed

Move Up/Down

Use Up or Down link to move the order of the filter rules.

Next Filter Set

Set the link to the next filter set to be executed after the

current filter run. Do not make a loop with many filter sets.

Wizard Mode

Allow to configure frequently used settings for filter rule via
several setting pages.

Advance Mode

Allow to configure detailed settings of filter rule.

To use Wizard Mode, simple do the following steps:

Click the Wizard Mode radio button.

Click Index 1. The setting page will appear as follows:

Available settings are explained as follows:

Item Description

Comments

Enter filter set comments/description. Maximum length is
14- character long.

Direction

Set the direction of packet flow. It is for Data Filter only.

For the Call Filter, this setting is not available since Call
Filter is only applied to outgoing traffic.

Note that RT means routing domain for 2nd subnet or other
LAN.

Summary of Contents for Vigor 2952 series












































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vigor 2952 series

Reviews:

Related manuals for Vigor 2952 series

Brands by name

Popular brands

DryTek Vigor 2952 series, User Manual

Search results

Summary of Contents for Vigor 2952 series

Reviews:

Related manuals for Vigor 2952 series

Brands by name

Popular brands