manualshive.com logo in svg

DryTek Vigor 2952 series, User Manual

Share
Download
DryTek Vigor 2952 series User Manual Download Page 164

 

Vigor2952 Series User’s Guide 

152 

Enable 

Check the box to enable the selected profile. 

Index 

Click the number below Index to access into the setting 

page. 

Profile 

Display the name of the LAN DNS profile. 

Domain Name 

Display the domain name of the LAN DNS profile. 

Forwarding 

Display that such profile is conditional DNS forwarding or 
not.  

DNS Server 

Display the IP addres of the DNS Server. 

You can set up to 20 LAN DNS profiles.   

To create a LAN DNS profile:   

1.

 

Click any index, say Index No. 1.   

2.

 

The detailed settings with index 1 are shown below. 

 

Available settings are explained as follows: 

Item Description 

Enable 

Check this box to enable such profile. 

Profile 

Type a name for such profile. 
Note: If you type a name here for LAN DNS and click OK to 

save the configuration, the name also will be applied to 
conditional DNS forwarding automatically. 

Domain Name 

Type the domain name for such profile. 

CNAME (Alias Domain 

Name) 

CNAME is abbreviation of Canonical name record. 
Such option is used to record the domain name or the host 
alias.  
Add – Click it to add a new host with specified reference. 
Delete – Click it to remove the setting. 

IP Address List 

The IP address listed here will be used for mapping with the 

Summary of Contents for Vigor 2952 series












































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands