Page | 14
Dryer Master DM510
Installation Manual
Project Manager Guide and Checklist
Installation Overview
Introduction:
This section is a guide for site managers. Its purpose is to detail responsibilities in the installation of
the Dryer Master DM510 computerized drying control system and a checklist is included to help you
track completion of the required steps.
The rest of this manual is intended to cover most standard installations and includes sensor and
electrical installation guidelines
If at any time you have any questions with either the details in this document or the installation
please contact the Dryer Master Support Centre toll free at 1-888-318-0009
If you are installing the DM510 on a new dryer refer to situation #1. For all other situations
please refer to situation #2.
Situation 1 Overview: Installation on new dryer when purchased from
dryer manufacturer
DMSI Responsibilities:
•
To ship the equipment to site upon receipt of a purchase order
•
To provide over the phone assistance during the installation process and during system
start-up
•
To assist the site operator(s) by phone during the drying season
Dryer Supplier / System Installer Responsibilities:
•
To mount the inlet moisture sensor, the outlet moisture sensor, the drying air temperature
sensor (or temperature signal converter), the sample button, and the Dryer Master I/O
system
•
To install conduit and wire the above devices to the Dryer Master I/O system located in the
DM510 or the dryer panel or a separate I/O enclosure
•
To connect the field devices (sensors) to the Dryer Master I/O system
Site Responsibilities (please see enclosed checklist and the physical installation
guide and conduit and wiring guide for more detailed information):
•
To mount the DM510 panel
•
To install conduit and run wiring from the dryer panel or I/O enclosure box to the DM510
panel
•
To terminate communication cable at the Dryer Master I/O device at the DM510 panel
•
To start-up the system with over the phone assistance from the Dryer Master Support
Centre
•
To arrange an over the phone commissioning time with the Dryer Master Support Centre
Summary of Contents for DM510
Page 1: ...INSTALLATION GUIDE ...
