DRUCK & TEMPERATUR Leitenberger GmbH •
Bahnhofstr. 33 • D-72138 Kirchentellinsfurt • GERMANY
Tel. +49 (0) 7121-90920-0 • Fax +49 (0) 7121-90920-99 • [email protected] •
• www.druck-temperatur.de
www.LR-Cal.net
MANUAL
XP100 und
LRT 1000
LR-
Cal
XP100 and
LRT 1000
LR-
Cal
22
also displaying detected results. You can also navigate the device soware by using the cross
control (3) and the OK bu on (5) and select measuring funcons.
By pressing the Back key (2) you return to the previous screen of the device soware. Pressing the
Menu key (6) directly opens the main menu.
Pressing the Illuminaon key (4) either switches the background illuminaon for the colour
display and the keys on or dims them.
Located above the colour display (1) is the connecon for the digital sensors (7). Here you can
connect the sensor. The measured results of the connected sensor are shown in the device‘s
colour display (1).
The On/Off key (9) and an USB connecon (10) are found on the sides of the device.
You can connect the device to a computer by using the supplied USB connecon cable. Then you
can extract and analyse your measured results with the SmartGraph3 soware.
Device depicon
1
2
3
4
5
6
7
8
9
10
(1)
Scratch-proof colour display with touch
funcon
(2)
Back key
(3)
Cross control with „Up“, „Down“, „Le“
and „Right“ keys
(4)
Illuminaon key
(5)
OK bu on
(6)
Menu key
(7)
Connecon for Pt 100 sensors (4-pin)
(8)
Ba ery compartment with ba ery cover
(9)
On/Off key
(10)
Micro USB connecon
