DRUCK
TEMPERATUR
&
Leitenberger GmbH •
Bahnhofstr. 33 • D-72138 Kirchentellinsfurt •
Tel. +49 (0) 7121-90920-0 • Fax +49 (0) 7121-90920-99 •
• www.druck-temperatur.de
GERMANY
DT
www.
-Cal.net
LR
MANUAL
LR
LR
-
-
Cal
Cal
200 +
200-T
LPC
LPC
59
6.4 Measuring modes
6.4.1 Standard measuring mode
Approx. 3 seconds aer switching on the
, with the
reference
calibrator
LPC-2
pressure sensor connected correctly, the "Standard measuring mode" display appears
(see igure below). It displays the current measured value, the unit and pressure type of
f
the currently-connected pressure sensor and addionally a bar graph and the charge
level of the rechargeable ba ery.
If the
sensor has not been calibrated with the
, the message
LPC-2
calibrator
"Uncalibrated Sensor" will appear on the display. Use of the sensor is
thus not permi ed.
1. Ba ery level display
2. Current pressure measured value
3. Current unit and type of pressure
4. Bar graph
6.4.2 Measuring mode incl.
/
funcon
MIN MAX
Via the
key diferent funcons can be superimposed, e.g. the
MODE
MIN
and
MAX
funcon (
).
MIN MAX
/
Acvaon of the
/
funcon
MIN MAX
Pressing the
key once* (directly within the standard measuring mode).
MODE
1
2
3
4
Standard measuring mode
* If you are in a different measuring mode than the standard measuring mode, press the
key unl the measuring mode with the
/
funcon appears on the display.
MODE
MIN MAX
